Sticker "BO"

Application and care instructions:

Thoroughly clean, degrease and allow the surface to dry completely before application.

Carefully remove the backing film. Ensure that the entire design remains adhered to the transparent transfer film.

Position the sticker in the desired location and press down evenly and firmly using a squeegee or a soft cloth.

Then slowly and as flat as possible peel off the transparent transfer film. The vinyl design will remain on the surface.

For optimal adhesion, the sticker should not come into contact with water, cleaning agents or extreme temperature fluctuations for at least 24 hours after application.

When applied correctly, the sticker is weatherproof and suitable for use in car washes.

The sticker can be carefully removed at any time. At low temperatures, gentle heating, for example with a hairdryer, can make removal easier.

Do not use harsh cleaning agents, abrasives or high-pressure cleaners in close proximity.

Manufacturer information:
Manufacturer: FuckThePhase
Address: Sommerkamp 16, 24768 Rendsburg
Email address: info@fuckthephase.com

Product information:
Product name: “BO” sticker
Item number: S-26-001
Material: Self-adhesive vinyl film

Safety information:

Not a toy: Not suitable for children under 3 years.

Small stickers or detached parts may be swallowed.

Do not apply to safety-critical areas, fields of vision, sensors, cameras, lights, or license plates.

Use only on smooth, clean, and grease-free surfaces.

Do not reuse damaged or badly peeling stickers.

Additional information:

Suitable for smooth surfaces such as vehicles, windows, mirrors, laptops, or other suitable surfaces.

Adhesion may vary depending on the surface, temperature, weather conditions, and exposure.

Do not apply to porous, heavily textured, dirty, or freshly painted surfaces.

Slight variations in size and finish may occur due to handmade production.